NEW AND IMPROVED DESIGN!
The static target stands are 18" wide and 22.5" long and designed for maximum stability and portability. With a wider footprint and a much more aggressive design, these stands dig in and stay put so you won't have to worry about your target shifting or falling over during your range session. Each corner has cutouts for spikes to secure the stand in place even further for magnum pistol and rifle use.
The standard version stands assemble with two 3" bolts and lock nuts which are included, and require no thumb screws so set up is quick and easy. There are two holes cut in the upright that will accommodate 1/4"x1" Lag Screws if you would like to secure the 2x4 to the stand. The deluxe version has two extra bolts added to the upright to secure the stand to the 2x4.
Don't forget your Improved Static Target Hanger for a complete static target mounting kit!
When removing spikes, do NOT use the stand to pull or "rock" the spikes out of the ground. For best results, use a claw hammer or similar tool.
Minor assembly is required with this product. All of our stands and hangers are designed to accept 1/2" hardware (included) which will require you to use power or hand tools to tighten. Wrench/socket size for 1/2" hardware is 3/4", adjustable wrenches may be used as well. All stands will require two tools (one to hold the nut, one to tighten the bolt), while hangers will only require a single tool as the shoulder of the carriage bolt will lock into place via the cutout on the target.