1″ EMT Gong Stand Kit

$83.97

  • Everything but the EMT Conduit needed to hang your ShootSteel.com Gong
  • Designed with durability, portability, and weight in mind
  • Allows you to customize your leg height and crossmember length

Description

The 1″ EMT gong stand kit gives you everything you need but the EMT conduit, saving you a ton of money on shipping and manufacturing costs. All you need is 1” EMT conduit, some handy work, and you have a stand!! This also allows you to adjust the height and width of the stand to your specific needs. This may be helpful if you shoot in hilly terrain.

We do not recommend using the stand with targets over 25lbs or with rifles larger than .308.

For mounting hardware take a look out our compatible products below!

NOTE: The kit DOES NOT include the EMT conduit. You will need to buy the EMT conduit at your local hardware store. The stand was only designed to work with EMT conduit. It WILL NOT work with rigid conduit or plumbing pipe.

NOTE: This kit requires the following operations to be performed: cut tube to length, measure 1.5” from end, drill a 5/16” hole, and deburr ends. If you are unsure of how to perform any of these operations, you may want to consider one of our standard gong stands (36×36 or 60×60). Detailed instructions are included with the kit.

Some of you may be asking what the difference is between rigid conduit and EMT. Both have the same inside dimension, but rigid conduit is much thicker. This allows the rigid conduit to hold much more weight. It also weighs and costs more than the EMT. Refer to the item descriptions for target weight and cartridge capacities.

Additional information

Weight 5.00 lbs