Includes bolts, chain, spare parts, and accessories.
New ShootSteel.com US Flag matte finish all weather stickers are here! These stickers are 5"x3" - get yours now!
OD Green and Black ShootSteel.com US Flag design patches are available now! This is a limited run, get yours while you can!
Branded ShootSteel.com Ear Bud container with Branded Ear Buds. Perfect backup for your trips to the range.
OD/Khaki ShootSteel.com embroidered unstructured trucker hat. 100% cotton front panels with polyester mesh mid and back panels with a 7 position adjustable snap.
Grey/Black ShootSteel.com embroidered structured trucker hat. 100% cotton front panels with polyester mesh mid and back panels. Features contrast stitching, and a 7 position adjustable snap.
3" tall, 1.75" wide, Shootsteel.com silhouette magnet is great for your refrigerator or gun safe!
2" round Shootsteel.com circle magnet perfect for your refrigerator or gun safe!
Pvc Shootsteel.com 2"x2" patch.
2" Matte finish all weather sticker.
4" Gloss finish all weather sticker.
The 1/2” bolt kit contains hardware to hang one target, 2 high strength bolts, 4 washers and 2 locknuts. This kit fits all of our 3/8" and 1/2" gong style targets.
Not designed to fit the “static” targets.
One kit is required per target, we also...
These 5/16” quick links work great to attach the chain to a gong stand. We do not recommend using them directly on the targets.
Sold per each
Bulk packed, zinc plated
This kit contains replacement hardware for the static target holder. The kit contains one Gr5 bolt, one stainless steel spring and one locknut.
The Gr5 bolts and springs last a long time when used with handgun. If you are using them for magnum handgun...
This is the same spring used on the static target hangers. They eventually wear out after thousands of rounds. If your bolt is still good you can order just the spring.
Our springs are custom made to ShootSteel.com specs out of stainless steel spring...
The 10” sections of chain are long enough for most targets when used with our gong stand. The chain is 3/8” GR100.
Grade 100 chain uses alloy steel heat treated to a higher hardness than Grade 70 which uses carbon steel. The Grade 100 is a good option...
The 15” sections of chain are long enough for most targets when used with the 60x60 gong stand and larger targets including the 12x20 and 18x30. The chain is 3/8" Gr100.
Grade 100 chain uses alloy steel heat treated to a higher hardness than Grade 70...
This chain has been selected and tested to withstand the impact of a 50BMG bullet. The chain is 5/8” grade 100, rated for and commonly used for lifting. The primary difference between this chain and lower grades is the alloy and hardness. Grade 100 chain...
We have been looking for an alternative to chain for quite some time. After research and extensive testing we have decided on a material that works great. It is flexible so the target moves freely yet durable to support even large targets. The material...
The 50 BMG bolt kit contains hardware to hang one target with 2 high strength bolts, 4 washers and 2 locknuts.
One kit is required per target, we also recommend a spare. The bolts are high strength but after a few direct hits they will break. High...
This is a replacement bolt fot the Short Range Rifle Target. These are grade 8 carrage bolts. Sold per each.
These 7/16" Anchor Shackles work great to attach the chain to a gong stand (especially our larger 5/8" chain). We do not recommend using them directly on the targets.
Sold per each
These 1/2" Quick Links work great to attach the chain to a gong stand. Recommended for use in tandem with our 7/16" Anchor Shackles for targets that require our larger 5/8" chain, or any other application requiring a more robust mounting solution than...
These general purpose landscape spikes work great to hold our stands in place on windy days. For most applications 2 spikes per stand are needed. These work great in most soil conditions and are gavanized steel for long term heavy range use. They will...
This hanger is designed specifically for our Precision Rifle Rack. It is constructed of a single piece of steel tube that has been cut to accept 1/2" hardware.
Use this in conjunction with any of our Precision Rifle Rack targets to configure your own...
The foam pads eventually wear out or get shot up. It is a good idea to have a spare on hand.
Note: These are only designed to work with the ShootSteel.com Standard Clay Target Flipper
These are 1.25" ID Spacers cut specifically for our Precision Rifle Rack. These can be purchased as a replacement or backup for lost/damaged spacers due to spalling or direct hits.
This is a replacement pin for the gong stands as well as the EMT and Rigid Conduit stands. Styles can change, though most are the round style as shown. Sold per each, zinc plated steel.
Best reloading wrench for 1" die lock nuts!
Wrench is finished and powder coated black.
This wrench was specifically designed to fit the Dillon brand 1” Die Lock Rings. This wrench is precision laser cut, not stamped like similar products. This allows...