Rigid Conduit Single Gong Stand Kit | DIY Customizable Steel Target Stand

The Rigid Conduit Single Gong Stand Kit gives you everything you need to build a sturdy, customizable gong stand except the conduit itself. Buying the conduit locally eliminates shipping costs on heavy metal tube and lets you cut the legs and crossmember to any length you need for your specific terrain, target height and shooting position. If you shoot on hilly ground or need a non-standard stand geometry, this kit lets you dial it in. Visit the ShootSteel YouTube channel to see our stands and targets in action.

The kit is designed specifically for 1" rigid conduit, which is available at hardware and electrical supply stores. Rigid conduit has the same inside diameter as EMT but significantly thicker walls, which is what gives it the load capacity to handle heavier targets and higher-energy cartridges. This kit will not work with EMT or standard plumbing pipe. Assembly requires cutting tube to length, measuring 1.5" from each end, drilling a 5/16" hole and deburring the ends. Detailed instructions are included. If you are not comfortable performing those operations, see our complete 60"x60" Rigid Conduit Gong Stand which ships fully ready to assemble. For hanging hardware, pair with the Steel Chain Mounting Kit or the Rubber Chain Mounting Kit. Ships unpainted. Conduit not included. Manufactured in the United States.

What's Included

• Rigid Conduit Single Gong Stand bracket hardware kit
• Detailed assembly instructions
• Required, not included: 1" rigid conduit (available at hardware and electrical supply stores). Will not work with EMT or plumbing pipe.
• Not included: Chain, quick links, target. See the Steel Chain Mounting Kit or Rubber Chain Mounting Kit for compatible hanging hardware.

Assembly Requirements

• Cut rigid conduit to desired leg and crossmember lengths
• Measure 1.5" from each tube end and mark drill point
• Drill one 5/16" hole per tube end
• Deburr all cut ends before assembly

If you are not comfortable with any of these operations, consider our complete 60"x60" Rigid Conduit Gong Stand instead.

Safety and Usage

Minimum shooting distances are determined by the target plate used with this stand. Maximum supported target weight is 75 lbs. Maximum rated cartridge is .338 Lapua Magnum. Do not exceed either rating. Always inspect all bracket hardware and conduit before every session. Replace any component that shows deformation, cracking or wear. Follow standard ShootSteel minimum distance guidelines for your cartridge and target combination. Always use quality eye and ear protection.

FAQs

Why does this kit not include the conduit?
Shipping rigid conduit is expensive due to its weight and length. Buying it locally at a hardware or electrical supply store eliminates that shipping cost entirely and lets you choose the exact tube lengths you need without being locked into a fixed stand dimension. The bracket hardware is the only component that requires precision manufacturing, so that is what the kit provides.

Why rigid conduit instead of EMT?
Both have the same inside diameter, but rigid conduit has significantly thicker walls. That wall thickness is what gives it the structural load capacity to support heavier targets and absorb the vibration energy of larger rifle cartridges without flexing or failing at the connection points. EMT is fine for lighter gong setups, but for targets approaching the 75 lb. maximum and cartridges up to .338 Lapua, rigid conduit is the right choice. This kit is designed specifically for rigid conduit and will not work with EMT or plumbing pipe.

Can I customize the stand height and width?
Yes. Cutting the conduit to your preferred leg and crossmember lengths is part of the assembly process. This lets you set the stand height for your target size and shooting position, and adjust the width for stability on uneven or hilly terrain. Detailed instructions are included to guide you through the process.

What if I am not comfortable cutting and drilling conduit?
See our complete 60"x60" Rigid Conduit Gong Stand, which ships with pre-cut conduit and requires only final assembly.

What hanging hardware do I need?
Chain and quick links are not included with this kit. Compatible options are the Steel Chain Mounting Kit and the Rubber Chain Mounting Kit.

Is this product made in the United States?
Yes. Our bracket hardware is manufactured in the United States.

Do you warranty your products?
Yes. We stand behind our products.

Personal and Recreational Use

• Stand components: covered against manufacturing and material defects for 90 days from date of delivery
• Welds: covered for 1 year from date of delivery
• Coverage includes weld integrity, materials and workmanship

Commercial and Range Use

• All components: covered against manufacturing and material defects for 90 days from date of purchase
• Coverage includes weld integrity, materials and workmanship
• Normal wear and degradation from high-volume or high-impact use are not covered

To qualify for warranty coverage, products must be used and maintained in accordance with ShootSteel safety and distance guidelines, including:

• No steel-core, armor-piercing or tracer ammunition
• Minimum recommended distances observed at all times
• Products mounted to ShootSteel specifications

ShootSteel reserves the right to request photos or inspection of any claimed item prior to approval. Misuse and abuse are not covered. Need a copy of our safety guidelines? Email us.

To start a warranty claim, contact customerservice@shootsteel.com with your order number and photos.